This 5/8" hose extension kit may be used to extend the heater core hose on 2007-2013 Mazdaspeed3 & 2006-2007 Mazdaspeed6. See picture below. Kit consists of: 1- 5/8" Gates Hose Connector (28604) 1- 3" Section of...
*Discontinued* HTP's Mazdaspeed Turbo Inlet replaces the restrictive plastic stock inlet for the 2006-2007 Mazdaspeed6 and the 2007-2012 Mazdaspeed3. These inlets are manufactured out of 3.0" T-6061 aluminum mandrel...
Compatible with the stock battery box. The ECU does not need to be relocated however, the lower ECU cover will need to be removed. (NOTE: When run with BNR turbos only, ECU relocation is required for proper fitment...
Compatible with the stock battery box. The ECU does not need to be relocated however, the lower ECU cover will need to be removed. (NOTE: When run with BNR turbos only, ECU relocation is required for proper...
Compatible with stock battery box (MS3). ECU relocation required. This full one-piece intake pipe includes an integrated MAF with honeycomb air straightener for the most accurate airflow reading. ...
Compatible with stock battery box. ECU relocation required. This full one-piece intake pipe includes an integrated MAF with the air straightener omitted for open air flow. TUNING REQUIRED...
This full one-piece intake pipe includes an integrated MAF with honeycomb air straightener for the most accurate airflow reading. TUNING REQUIRED. Includes: HTP 4.0" Intake System -Full 4.0"...
This full one-piece intake pipe includes an integrated MAF with the air straightener omitted for open air flow. TUNING REQUIRED. Includes: HTP 4.0" Intake System -Full 4.0" one-piece intake pipe...
This kit includes replacement hardware for HTP 3.0", 3.5", and 4.0" Full and Open Air Intake Systems as well as the HTP 3.0" Turbo Inlet Pipe. ***NOTE: If you purchased an HTP Intake system of any size you DO NOT need...